The furnace plate is 1600 mm. The side of the furnace body is equipped with a wall of water cooling and a surface of radiation water heating.*ISotto 1600.Important.The furnace melting process is introduced.
Body configuration, water -cooled wall board 160, interna l solution 160, 1600, 1600 *14, police 57 *3, 159 *6, 133 *6, 130, before and after police use, with high combustion rate.
1. Easy installation:
Boilers are usually equipped with fast -fitting equipment that facilitates transportation and installation equipment, greatly shortens the building cycle and offers users a comfortable environment.
2, operation failed:
The boilers are ready, the water circulation is smooth and the cooling is timel
It is easy to open the box in front of the kettle, and the staff can check it easily and clearly.These are good conditions for proper operation.
The coating system is reasonable, the water circulation is smooth and the cooling is timely.
5. Life and sustainability:
The ice is an excellent and advanced production installation with strict quality control, with quality assurance for each new pot.
6, low noise level:
The boiler is characterised by a low temperature of the gas from the combustion chamber, a high -performance scrubber, low noise, etc., which meets national environmental requirements.
Main Technical Parameters of Series Biomass Hot Water Boiler
|Feed Water Temperature||℃||70||70||70||70||70||70||70|
Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
|Mainframe Transport Weight||/||t||15||18||24||27||31||33||41|
|Outlet Water Valve||DN||mm||80||100||125||125||150||200||200|
|Feed Water Valve||DN||mm||80||100||125||125||150||200||200|
|Safety Valve Diameter||DN||mm||1*32||1*50||2*40||2*40||2*50||2*50||2*50/80|
|Drain Valve Pipe Diameter||DN||mm||3*40||3*40||3*40||3*40||3*40||3*40||3*40|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
|Contact Person :||Mr. furnacess|
|Tel :||+ 86 17733330123|