Pressure Hot Water Boiler
The steam boilers of the series are double drums, longitudinal -D series, fast steam boilers. The boiler series consists of upper and lower drums, membrane walls, convection pipes and capacitors. Fuel is burned in the boiler. Liquid gas is piped from the convection pipes into the chimney and waste heat recovery plant. With the mechatronic structure, the performance in China is leading.
1. Advanced Control System:
Fully automatic control, users only have to press the start button, the boiler can be set according to the program to start the operation. Load control and automatic water supply are all automatic operations to meet the user's requirements.
2. In accordance with environmental requirements:
The range of the furnace is large and equipped with high -quality and reliable imported burners, so that fuel can be completely burned and harmful components in the exhaust gas reduced significantly. The inspection by the relevant departments shows that our oil and gas boilers meet the highest national environmental protection requirements and meet national environmental protection requirements. Continuous improvement of environmental requirements.
3. Different fuels:
The range of furnaces is large, the combustion of fuels is sufficient, especially suitable for low -calorific fuels such as coke oven gases, blast furnace gas, etc. The combustion efficiency of high -calorific fuels is better, such as natural gas, liquefied gas, etc.
4. Appropriate structure:
It is easy to fix the burner head by installing the front water wall in front of the boiler, which ensures the water level and cooling near the burner, and helps to eliminate carbon deposition in the burner and increase fuel consumption.
5. Easy maintenance:
The explosion -proof door, the fire -resistant hole and the overhaul door are mounted on the wall of the boiler and the shaft door is placed at the front and back of the boiler water to facilitate the overhaul of the boiler.
|Main technical parameters of series pressure cushion water boilers|
|Rated Heat Efficiency||MW||7||105||14||21||29||35||42||46|
|Rated Working Pressure||MPa||1.0/125||L0/L25||1.0/1^5||1^5/1.6||125/L6||1-25/1.6||L25/L6||1.25/16|
|Rated Effluent temperature||°C||115/130||115/130||115/130||115/130||115/130||115/130||115/130||115/130|
|Return water temperature||°C||70||70||70||70||70||70||70||70|
Natural gas, liquid gas, city gas, light oil
|Rated water circulation||M³/h||133/100||200/150||266/200||400/300||551/414||665/500||798/600||874/657|
Note: The fuel consumption in the table is calculated by low calorific value of light oil 42915KJ/Kg (10260Kcal/Kg), low calorific value of natural gas 35588KJ/NM3 (8500Kcal/NM3), low calorific value of liquefied gas 45998KJ/Kg (11000Kcal/Kg), low calorific value of urban gas 16750K/NM3 (4000Kcal/NM3).
|Configuration and Interface Dimensions of Series Pressure Overlay Boilers|
Host transport dimensions
(length * width * height)
|Separate transportation||Separate transportation||Separate transportation||Separate transportation||Separate transportation|
|Outlet Valve Diameter||DN||mm||150/200||200||200||2*200||2*200||2*200||2*200||2*300|
|Backwater Valve Diameter||DN||mm||50||50||2*50||2*50||2*50||2*50||2*50||2*50|
|Atmospheric Connecting Pipe Diameter||DN||mm||750||1000||1100||1400||1700||2000||2000||2200
Note: Due to the continuous updating of products, the company reserves the right to modify the data in the above two tables.
|Contact Person :||furnacess|
|Tel :||+ 86 17733330123|