Application of induction electric furnace:
Induction Electric Furnace , mainly used in melting point is lower than 1600. C metal melting and purification, fusion metal alloy material.It is widely used in industry production for metallurgy, casting, alloy workpiece manufacturing etc.Also by the laboratory select and use for metallurgy process research, casting process research, alloy process research, etc.Because it does not produce by waste gas, waste water and noise etc.,does not polluting the environment, so it is replacing the traditional metal smelting melting equipment.
Instruction overview for melting furnace
This equipment is composed of furnace body, tilting controller, water cooled cable, capacitor, medium frequency, water cooling plant.
1. Furnace Body
Furnace structure has four type, aluminum reduction tilting furnace, aluminum hydraulic furnace, magnetic shielding steel furnace and hydraulic steel furnace reduction tilting furnaces equip with reduction machine, hydraulic tilting furnaces equip with hydraulic pump and work station. The whole sets generally have two furnaces using for melting and maintenance. Induction coil installs in the central of the furnace, it has spiral body with rectangular empty brass circle around, the pipe center should be cooled with water. Copper bar outside induction coil will connect with water-cooling cable. The lining closes to induction coil, which made by burden, the method you can find in related parts below.
2. Tilting Controller
The controller is a control box for tilting furnace. The switch on the controller can choose furnaces and the button can move around through the rubber soft line, and also control the furnace for tilting and resetting (this part should be installed by users themselves).
3. Water-cooled cable
Water cooled cable is made of soft copper wire, hose,cable end, through them to connect with
capacitor and furnace.
Capacitors compose of electric heat, holder, the converge-wires. it supply power.
5. Medium Frequency power cabinet
Medium frequency power cabinet will transmute three-phase ac power frequency into medium ac power.
6. Water-cooling plant(Prepared by user)
Water cooling plant include water inlet and outlet water tank, it supply for an induction coil. water-cooled electric cable and cooling water in capacitor, can be divided into five ways, usually using only three way(once melting furnace does not work the water in the induction coils and cooling cable can be close down through the valve).
Technical parameter of electric induction furnace:
|Contact Person :||furnacess|
|Tel :||+ 86 17733330123|