SeriesBiomass Steam Boiler
The new steam boiler in the series is a water boiler with a single drum, cap and tube, with chain barbecue combustion equipment. The water wall on both sides of the oven body is a surface of heating by radiation.
A new cross -regulation technology shall be adopted at the bottom of the furnace tube. The two wings of the furnace body are convective heating surfaces, and the convective heating surface of the filament pipe (57 x3).The furnace wall is made of heat -resistant concrete, and the exterior of the boiler is a three -dimensional casing.
1. Easy installation:
Boilers are usually equipped with quick -fitting devices that allow the transport and installation of equipment, greatly shorten the construction cycle and provide a comfortable environment for users.
2. Operation failed:
The air conditioning is perfect, the water flow is smooth and the cooling is timely.
3. Maintenance equipment:
It can be opened in front of the boiler, and the staff can check it easily and clearly.
4. Total combustion
The coating system is reasonable, the water flow is smooth and the cooling is timely.
5. Life and sustainability:
Freezing is an excellent and advanced production equipment with strict quality control. Each new boiler has quality assurance.
6. Low noise level:
The boiler shall be marked with low temperature exhaust emissions from the combustion chamber, high performance washing machines, low noise air and so on, meeting national environmental requirements.
Main Technical Parameters of Biomass Series Steam Boiler
|Feed Water Temperature||℃||20||20||20||20||20||20||60|
Note:biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
External and Interface Dimension of Biomass steam boiler
|Mainframe Transport Weight||/||t||15||18||24||27||31||33||41|
|Main Steam Valve Pipe Diameter||DN||mm||65||80||100||100||125||150||150|
|Feed Water Valve||DN||mm||40||40||40||40||50||50||50|
|Safety Valve Diameter||DN||mm||2*40||2*50||2*50||2*50||50/80||2*80||2*80|
|Drain Valve Pipe Diameter||DN||mm||3*40||3*40||3*40||3*40||3*40||3*40||3*40|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
|Contact Person :||Mr. furnacess|
|Tel :||+ 86 17733330123|