Industrial Vacuum Oven, the material is to be dried under vacuum conditions, heating and drying. Use vacuum pump to pump air and humidity out, make the working room form vacuum, speed up the drying speed.
1. When the heating temperature constant, increase the degree of vacuum, can speed up the drying rate.
2. When the vacuum is constant, increase heating temperature, can speed up the drying rate.
3. Both to improve the degree of vacuum, and improve the heating temperature, greatly speed up the drying rate.
Vacuum oven can get higher drying rate at lower temperature and make full use of heat.
Suitable for: food, medicine, chemical, metallurgy, grinding tools, vegetables, fruits, meat, rubber products, etc
Drying of heat-sensitive materials and materials containing capacitors and solvents to be recovered.
It can be sterilized before drying, and any impurity is not mixed in the drying process.
Under Vacuum condition, the boiling point of materials solution is reduced. So to a certain amount of heat transfer, it saves the evaporator heat transfer area.
Heat source for operation of evaporation can use low-pressure steam or waste heat steam.
The heat loss of the evaporator can be reduced.
Used in drying of decompose and polymerize and deterioration of heat-sensitive materials at high temperature.
Before drying can be disinfected, the drying process were not mixed with any impurities
It is a static vacuum dryer, compact solid dry material is not damaged.
Workroom dimensions(mm) | 650x600×976 | 700x800x900 | 830×1020×1200 |
Exterior dimensions(mm) | 1053×745×1020 | 1150X1000X1000 | 1130×1240 ×1850 |
Temperature range | 35℃ ~+350 ℃ | ||
Temperature fluctuation | ± 1°C | ||
Temperature resolution | ±0.1°C | ||
Vacuum degree | <133pa | ||
Controller | Digital PID Temperature Controller | ||
Sensor | PTR Platinum Resistance PT100 | ||
Interior material | SUS304 stainless steel | ||
Exterior material | Steel plate with protective coating | ||
Timing Function | 0.1~999.9 (S,M,H) settable | ||
Power Supply |
AC 220V 50HZ |
||
Other Name |
Industrial vacuum Oven |
Q1: Are you manufacturer?
Yes, we are manufacturer. You are welcome to visit our company and check every
steps which we are manufacturing Environmental test chambers.
2: Which languages can your team support?
Our team can support you English, Chinese, German(Deutsche), French(français),
Russian(русский), Turkish(Türk), Romanian(Română)
Q3: If we order is big test chambers from you, how should we install it at our side?
We offer the service of on-site installation and trainning for you.
Q4: Excellent after sale service?
Sale warranty for36 months. Lifelong Follow-up Services
We can offer support via email, telephone, skype, etc
We have a professional after-sales team, if you have any questions during operation, we will supply solutions to you with 24 hours/our engineers on site service
5: Packaging
TPackage with Export Standard Wooden Box, which not only
has good shock absorption, impact resistance, heat sealing and also has the advantages of
nontoxic, odorless, moisture corrosion, good transparency.
More products welcome to consult!
Our main products included temperature and climate test chambers, corrosion chambers, weathering testers, IP dust and rain chambers, ozone test chamber, noxious gas SO2 H2S chamber, walk-in chambers.
Contact us now for a 3%-5% discount!