The plate is 1600mm.On the side of the furnace tower there is a water cooling wall and a heating surface for radioactive water.
Body configuration, water -cooled wall structure 160, internal solution 160, 1600, 1600 *14, police 57 *3, 159 *6, 133 *6, 130, before and after police use, high combustion speed.
1. Easy to install:
Boilers are usually equipped with a quick installation device, which facilitates the transport and installation of the equipment, significantly shortens the construction cycle and provides comfort to users.
2. Operational failure:
The boiler equipment is complete, the water circulation is smooth and the cooling is done on time.
It is easy to open the drawer in front of the boiler and the staff can check it easily and clearly. These are good conditions for proper operation.
4. Total combustion
The coating system is reasonable, the water circulation is smooth and cooling is on time.
5. Life and sustainability:
Freezing is an excellent, advanced production equipment, and quality control is strict. Each new boiler has a quality guarantee.
6. Low noise level:
The boiler is characterised by a low temperature of emissions of gases from the chamber, high -performance scrubbers, low -noise air, etc., which meet national environmental requirements.
Main Technical Parameters of Series Biomass Hot Water Boiler
|Feed Water Temperature||℃||70||70||70||70||70||70||70|
Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
|Mainframe Transport Weight||/||t||15||18||24||27||31||33||41|
|Outlet Water Valve||DN||mm||80||100||125||125||150||200||200|
|Feed Water Valve||DN||mm||80||100||125||125||150||200||200|
|Safety Valve Diameter||DN||mm||1*32||1*50||2*40||2*40||2*50||2*50||2*50/80|
|Drain Valve Pipe Diameter||DN||mm||3*40||3*40||3*40||3*40||3*40||3*40||3*40|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
|Contact Person :||furnacess|
|Tel :||+ 86 17733330123|