Microwave Muffle Furnace For Ceramic Sintering
The Microwave and Electric Chamber Furnace has a maximum temperature of 1700°C and can be applied for laboratory and industry use, while its advantages of high heating efficiency, rapid heating speed and good heating uniformity makes it reliable for application.
The chamber furnace is specially suitable for sintering and research of electronic ceramics, structural ceramics, functional ceramics, transparent ceramics, alumina ceramics and zirconia ceramicsv etc. under air atmosphere conditions.
| Parameters | ||
| Power | Voltage | 380V±10V 50Hz |
| Rated Power | 18KW | |
| Electrical Heating Power | 10KW | |
| Microwave System |
Microwave Output Power |
0.10~5.60KW continuously adjustable |
| Microwave Frequency | 2.45GHz | |
| Microwave Leakage Prevention | microwave leakage intensity<2mW/cm2 | |
| Thermal Insulation System |
Tmax | 1700°C |
| Working Temperature | 0~1650°C | |
| Heating Space(L×W×H) | 160×160×120mm | |
| Temperature Control System |
Temperature Measurement Method |
infrared thermometer |
| Temperature Measurement Range |
300°C~1800°C | |
| Temperature Control Precision |
±0.1% | |
| Control System |
Auto, Manual and Isothermal Controlling Mode, PLC+Touch Screen |
40 segments of programmable technical parameters, data storage and export, real-time curve data display, dynamic data display |
| Safety System |
Magnetron Alarm | over temperature alarm |
| Furnace Door Protection Alarm | furnace door shutdown sensor | |
| Cooling System | Cooling Water Requirments | flow rate≥ 2m3/h, T≤35°C |
| Overall Dimension |
Floor Area | ca. 1100×600×1700mm |
