3D Printing Microwave Furnace
The 3D Printing Microwave Furnace is designed specially for ceramic sintering using 3D printing technology with a mixed heating source ie. microwave and electric.
The maximum temperature is 1400°C and the furnace can work constantly under 1350°C .
The 3D Printing Microwave Furnace is suitable for fast sintering of ceramics with high heating efficiency and low energy consumption.
| Parameters | ||
| Power | Voltage | 380V±10V 50Hz |
| Rated Power | 18KW | |
| Electrical Heating Power | 8KW | |
| Microwave System |
Microwave Output Power |
0.10~5.60KW continuously adjustable |
| Microwave Frequency | 2.45GHz | |
| Microwave Leakage Prevention | microwave leakage intensity<2mW/cm2 | |
| Thermal Insulation System |
Tmax | 1400°C |
| Working Temperature | 0~1350°C | |
| Heating Space(L×W×H) | 300×300×280mm | |
| Temperature Control System |
Temperature Measurement Method |
thermocouple |
| Temperature Measurement Range |
0°C~1600°C | |
| Temperature Control Precision |
±0.1% | |
| Control System |
Auto, Manual and Isothermal Controlling Mode, PLC+Touch Screen |
40 segments of programmable technical parameters, data storage and export, real-time curve data display, dynamic data display |
| Safety System |
Magnetron Alarm | over temperature alarm |
| Furnace Door Protection Alarm | furnace door shutdown sensor | |
| Cooling System | Cooling Water Requirments | flow rate≥ 2m3/h, T≤35°C |
| Overall Dimension |
Furnace Body(L×W×H) | ca. 1100×600×1750mm |
