Three Pass Structure Environment-Friendly Biomass Steam Boiler
Series Biomass Fired Steam Boiler
The new sewing machine is a one-cylinder boiler - with a waterproof casing, and the oil material is a deep chain. Water-cooled walls on the left and right side of the furnace have a high temperature.
The new technique is used in the lower part of the sewing pipe: the two wings of the furnace body are full of heat, and the heat of the stainless steel belt (57 × 3) is on the drum. The fireplace is made of durable cement and has three dimensions outside the pan.
1. Easy to install:
Typically, boilers are fast-moving plants that are easy to transport and install, which reduce construction time, save on installation costs, and allow for timely delivery of boilers.
2. Trusted act:
The boiler heating system has been designed because, the water flow is consistent, and the fuel level is cooled on time to ensure boiler safety.
3. Proper care and maintenance:
An inspection hole is provided at the drum to enter the inspection. It is easy to open the smoke box before the fire, and the staff can easily and clearly check and create the right conditions for the right treatment.
4. Burn completely:
With a supportive climate and soft structure, the oil is heated thoroughly to remove black smoke.
5. Appropriate golf:
The flame uses double ventilation, and the cleansing technology in front of the pan avoids this, so avoid air, oil leaks, unwanted ventilation, normal operation and obvious benefits over simple grinders.
6. Easy cleaning:
A large amount of combustion ash will be created by combustion, which can remove dust from the soil, prevent work errors, reduce fuel efficiency by collecting ash, and provide consistent boiler load.
Main Technical Parameters of Biomass Series Steam Boiler
|Feed Water Temperature||℃||20||20||20||20||20||20||60|
Note:biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.
External and Interface Dimension of Biomass steam boiler
|Mainframe Transport Weight||/||t||15||18||24||27||31||33||41|
|Main Steam Valve Pipe Diameter||DN||mm||65||80||100||100||125||150||150|
|Feed Water Valve||DN||mm||40||40||40||40||50||50||50|
|Safety Valve Diameter||DN||mm||2*40||2*50||2*50||2*50||50/80||2*80||2*80|
|Drain Valve Pipe Diameter||DN||mm||3*40||3*40||3*40||3*40||3*40||3*40||3*40|
Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.
|Contact Person :||furnacess|
|Tel :||+ 86 17733330123|